Wago 773-102 - 2 Port Pushwire Connector

SKU: 773-102
£ 0.08 Ex. VAT
Availability: GBP 0.0800 in_stock In Stock
  • Buy 100 for £ 0.07 each and save 13%

Quick Overview

Manufacturer Wago 
Part No. 
Current rating
Voltage rating 0 - 400V / 4KV
Weight 1.847 g

RoHS Compliant

Suitable for use with:
Solid cable cores with a c.s.a. from 0.75mm² to 2.5mm² 
Stiff Stranded cable cores with a c.s.a. from 1.5mm²  to  2.5mm2


    Single pole pushwire commoning terminal
    Simply pushing the stripped conductor into the connector makes the connection. The transparent housing provides a visible indication that the conductor is secure. There is also a test point in the base of the housing which can be accessed using a standard test probe. To remove the connector simply pull on the conductor whilst twisting the connector block back and forth. The connector can then be reused. This two port connector will be most useful for making a simple striaght through connection of two cable cores though it is also be used to cap off a single wire that needs to be made safe as the connector is encapsulated and provides protection to IP2X and is touch safe when there is no moisture present.

    Certified to BS EN 60998 - Connecting devices for low voltage circuits for household and similar purposes. Particular requirements for connecting devices as separate entities with screwless-type clamping units.

    Compliant with BS7671
    Wago connectors meet the most stringent UK and international standards including the electrical requirements of BS7671 17th Edition. Installers can be totally confident that using Wago connectors enables them to follow 'best practice' procedures and fully comply with the most up to date safety criteria.  British Standard 7671 is the national standard in the UK for electrical installations and the safety of electrical wiring in domestic, commercial, industrial, and other buildings.

    RoHS Compliant

    SKU 773-102
    Connector Type Pushwire
    Colour Yellow
    Wire Ports 2
    Current Rating 24A
    Cable Types 0.75mm² - 2.5mm² Solid, 1.5mm² - 2.5mm² Stiff Stranded
    Width 13.1mm
    Length 19.5mm
    Height 9.2mm
    Connector Weight (g) No
    Strip Length 12 - 13mm
    Delivery & Returns

    Need it Quick?
    Next working day, Saturday and Premium timed delivery options are available for for most mainland UK destinations. These will be offered at the checkout and the options available will be based on your delivery address.

    How much is your delivery cost?
    Packaging and carriage is charged based on the weight of the order.  Premium timed delivery options are also available for some destinations, please see individual  pricing at checkout. You can choose from a selection of delivery options when you reach the checkout stage of your shopping before confirming your order. We currently send out parcels via Royal mail packet post (1st or 2nd class) and the Parcel Force Express courier service. A discount of 5% against carriage is applied to a basket when ordering over £50 ex vat.

    Please be aware that Royal Mail signed for services are not guaranteed although they aim to deliver 93% of 1st Class mail the next working  and 98% by the second working day after posting. A package is not considered lost until 10 working days since posting have elapsed. Royal Mail special delivery is a guaranteed service and your order should be with you by 1pm on the next working day (or Saturday if selected).

    Need to return something?
    There may be a time when you need to exchange or return something you've bought. Please make sure that you check your products carefully before they are used or installed. Please keep your order or invoice number, which can be found on your order confirmation or on the delivery packaging, as you will need it as proof of purchase in the event of any after-sales queries. If the products are damaged, faulty or if the products are incorrect and do not correlate with your invoice we'll be happy to exchange the product or give you a refund.

    Call us on +44 (0)1353 666011 or email sales@connexbox.com to arrange an exchange, refund or return.

    • From Dave T at 04/03/2013 20:09. Was this helpful?  Yes   No
      Can these be used on Ring Mains?
      Yes they can. Typically a ring final circuit is installed using 2.5mm twin and earth cable and the 773 series terminals are compatible this type of solid core cable. With respect to the current rating a ring main has two current paths and this is why a 32A over current protective device (Circuit Breaker or Fuse) can be used. The regulations indicate that accessories on a ring final circuit have a minimum current rating of 20A which is in line with the current carrying capacity of the cable, as the 773-102 has a rating of 24A this is well within this requirement.
    • From Geoff K at 15/02/2014 10:02. Was this helpful?  Yes   No
      Great product, quick and easy to use but do these need a separate enclosure such as a chocbox? Thanks.
      Hi Geoff,
      Yes they do. Where basic insulation is exposed then this should be protected by an enclosure. The Wagobox enclosure has been designed specifically for this purpose.
    • From PF at 27/05/2016 12:25. Was this helpful?  Yes   No
      Are these Maintenance Free?
      Yes, Wago spring clamp connectors are maintenance free. Note: The MF mark, referred to in BS7671, relates to a maintenance free accessory which must also include the enclosure. The 773 and 222 connectors when used with a Wagobox in accordance with the MF installation instructions will form an MF accessory.

    * Required Fields

    1. Time saving and impress customers too!
      by Kev May 24, 2013

      It's a no brainer. connectors simple quick and reliable. Enclosures have cord grip which choc box has not, unless you are prepared to fanny around with the screws and tabs in some of them? I'm certainly not. I take the terminal block out of downlights and use the spring loaded connectors instead - happy days! Can build the circuit, test, then add the light fittings c/w bulbs / LED's later!

    2. Outstanding and Excellent
      by Jonathan M February 25, 2013

      Fast, clean safety in mind. These terminals connectors in conjunction with or without the Wago box are second to none!
      Less time spent messing around with sizing cables to fit other terminal connectors or small screws and then having to try and fit in place with other type junction boxes. Stress free!
      Ray, thank you for all of your advice and time via the telephone and your emails.
      Simply The Best.

    3. Great products!
      by gazzamikes June 03, 2011

      Was shown these during my AM2 exam and used them ever since, cuts termination times greatly which for me makes up for the extra few pence each!

    4. Nifty kit
      by steve May 30, 2010

      used to build a lighting circuit from scratch !! i hate down lights but hey with them connectors they are a dream! no more looking up and fiddling to get the screw to sit on wire..! not used for ring yet but will give a go soon..!

      wagobox is good piece of kit also however i some time find a simple choc box minus the connector strip can work just as well and save a few £££

    5. Ring Use and Current Rating
      by Brown Badger Ltd April 05, 2010

      Have now been using on Ring Circuits for over a year and these are fine for all 2.5 mm joints (this 2 pole connector) and tees/spurs (use the Orange 4 pole 773-104). Also for radial circuits up to the connector rating (24 Amp) so in practice this means 20A MCB circuits maximum usually..A quick and easy system once you have had a little practice with using it.

    6. A must have item
      by Antric Electrical (Manchester) November 18, 2009

      I have used these Wago's now for at least 12 months if not more.
      Where lighting terminations are concerned they are excellent and I am now geared up with every type of connector.
      Wish they had been around years ago.
      Wish they were boxed in larger quantities of 500 or even just hundreds which could bring cost per connector down .

    7. Fast, Easy to Use, Neat
      by Steven September 25, 2009

      Well at first I had my doubts, but after using them now for 3 months I am finding I choose these over normal screw connectors always.

      My only minus point is cost, the screw connector is a lot cheaper.

    8. Simple and Quick
      by SPDLtd July 19, 2009

      With all the range its simplicity and compliance ensures the job is safe and up to date.

    9. Dont forget the current rating
      by Tim March 08, 2009

      Have used push connectors for a year or so, save much time, be carefull if using to extend ring main however, these push fits ar rated at 24A, ring MCB is 32A, use the cage clamp type instead which are 32A. I know at least one electrician who has been using for a while before this was pointed out.

      Webadmin writes:
      Hi Tim, thanks for the feedback.
      A rIng main can be supplied through a 32amp MCB as there are two current paths. As we are using 2.5mm cable to make the ring, no arm of the ring should carry more than 20 Amps as this is the current carrying capacity of the cable in the majority of installation methods. Therefore the minimum requirement for a junction in a ring is 20Amps (See BS7671: 433.1.5) The pushfit connectors are rated up to 24 Amps and are therefore fine for use in a ring main circuit. Of course the 222 connectors are also a very good choice.

    10. Superd, quick and easy to connect cables.
      by strings January 15, 2009

      Using all types of wago connectors, saved loads of time, no damage to cables and very neat.

    Write A Review

    Only registered users can write reviews. Please log in or register

    Related Products

    Please wait...

    Continue shopping
    View cart & checkout
    Continue shopping
    View cart & checkout

    Select your preferred Currency: